http://www.cleverscampcamp.com/cree-led/
Go Green With LED Lighting
LED lighting is often overlooked in ‘green building’ literature while more expensive and less satisfactory environmental solutions are pursued. The purpose of this article is to discuss some of the benefits of LED lighting, and to argue that LED lighting should be considered an essential element of any ‘green’ building, house, or construction project. Let’s start with some of the benefits of LEDs. Pardon the list but there are so many it is difficult to work it into a paragraph.
LED lighting uses 80% less energy than incandescent lighting.
LED lighting produces 500% more light per Watt.
LED lights have lenses that focus the light into a pattern of equal distribution adding to energy savings as light is not wasted bouncing in unneeded directions.
LED lights do not produce as much heat. This can save on energy and maintenance costs.
LED lights do not emit significant UV or IR radiation. IR is back to the heat issue, and UV is something we generally try to avoid.
LED lights last 50,000 hours or about 25 times longer than incandescent lights. This saves obviously on maintenance and disposal.
LED lights do not contain mercury common in fluorescents.
The above is meant to be a list of environmental benefits. There are other aesthetic benefits of LEDs. For one the color temperature can be precisely controlled. Secondly, the lenses allow for better lighting rendition. This pretty much summarizes most of the benefits, and there are not any environmental risks posed by LEDs. I would simply note that while other green technologies may have some difficult drawbacks to overcome that the advantages of LED lighting are fairly strait forward and clear cut.
If there was an apparent drawback, at least from the consumer perspective, it would be the expense. An LED PAR38 12 Watt light can cost 10 times as much an incandescent light. In fact, however, the expense of LEDs is not a drawback at all. Once, energy and replacement costs are figured in the LED lights actually save money. Simply consider the cost of 24 extra replacements of the incandescent light. Then factor the extra energy use and its really not even close. We did not include that in the summer LEDs put less load on the air conditioning. Its clear the LED light ultimately saves money, but many are reluctant to purchase due to the longer term of the payback.
So if your convinced, and you want to ‘go LED’ what are some of the best products? In fact there is a broad spectrum of lighting possibilities. Everything from PAR lights to recessed ceiling lights are available all at costs that payback before too long. You should also consider the source of your LEDs. The best LEDs (in this authors opinion) are produced by CREE and SSC. CREE is a US company and SSC is in Korea. The LED fixtures may be made by any manufacturer but try to verify the source of the LEDs.
Finally, the real benefit of LEDs is that they are cool. Yes, they are not as hot as incandescent lights, but I mean they are cool. When you see the lights and what they do it is impressive. Considering how important lighting is LEDs represent the best solution and they are available today.
LEDHomePlace offers a complete spectrum of LED lighting solutions.
About the Author
Robert Badaracco
Cree XLamp XR-E White LED
|
|
Energizer Night Strike LED Light with Swivel Head $45.17 With a light for every task and outstanding durability and convenience features, the Energizer Night Strike LED light (model ENS2G21L) is an excellent lighting choice for the outdoor enthusiast. Three modes for each LED (except UV) allow you to choose the level of light you need. Plus, LEDs can be used in any combination. Discrete, tactile switches are easy to find in the dark. The tailcap is hi… |
|
|
Fenix E21 Flashlight $48.00 The Fenix E21 LED Waterproof Flashlight is the perfect portable flashlight, requiring only two AA batteries that provides up to 11 hours of uninterrupted light. The LED gives off a constant brightness of 48 or 154 Lumens, depending on the output setting, and has a lifespan of 50,000 hours. Waterproof up to 6.5 feet (2m). Features simple twist-head to toggle between low and high settings, tail push… |
|
|
TerraLUX TLE-6EXB MiniStar5 140 Lumens Extreme LED Replacement Bulb for 2-3 C&D Cell MagLites $32.49 140 Lumen LED upgrade kit Amazingly brilliant light, even when batteries are low Batteries last 6 times longer than with incadescent Rugged – virtually unbreakable Won’t burn out, virtually unbreakableThe MiniStar5 preserves one of the most outstanding features of the Mag Instruments® line of flashlights,the ability to focus. The MiniStar5 produces a focused beam that throws a bright beam a very… |
|
|
Transformers Animated: Transform and Roll Out $12.45 An entertaining amalgam of the Transformers toy line, 1980s animated series and the live-action film by Michael Bay, Transformers Animated: Transform and Roll Out updates the venerable robot warriors without losing their core appeal to younger viewers. Sold as a feature film but actually the first three episodes of the Transformers Animated TV series, Transform and Roll Out re-imagines the Autobot… |
|
|
Dimmable 6W LED MR16 GU10 base Flood 45 Soft White bulb $5.01 ECO-LITE Dimmable 6 watt 100-240V MR16 GU10 LED lamps, with 6w High Power LED, GU10 base, a new heatsink that feature a higher lumen output of 330 lumens for soft white bulbs. Attention |
|
|
Ultrafire Li-ion 18650 3000mah Battery $3.99 Protected 18650 3000mAh rechargeable 3.6 volt battery – charge with the Ultrafire Multi-Battery charger. The advantage of this cell is that it features a button top making it particularly compatible with many flashlight applications. Rechargeable Lithium batteries are rapidly becoming a very economical way to lower the operating costs of Lithium-Powered flashlights. We offer a number of different … |
|
|
Brightest MR11 12V 10 SMD LED Bulb Wide Angle This is our brightest MR 11 bulb. It has 10 high-powered led bulbs, which produce about a 3 watt Luxeon bulb. The light pattern is perfect for illuminating displays or even just adding accent lighting yet it is still bright enough to be used anywhere. LED bulbs are compatible with all types of magnetic transformers but not all electronic transformers. Many electronic transformers require a minimum… |
|
|
DSLRKIT LED Video Lamp WALLI $99.99 … |
|
|
MICRO LED HEADLIGHTDIMABLE PIVOTING HEAD $37.49 MICRO LED HEADLIGHTDIMABLE PIVOTING HEADHigh intensity white Cree LEDAdjustable brightness levels from 100% to 6% 3 light modes spot, variable brightness and red for night visionDiscrete switching2 hours of run time on maximum setting using1AA Energizer MAXWaterproof Please note: This supplier will be closed on 11/24 and 12/26 for the holidays. The shipping cut off is UPS’s cut off of 12/15 to try… |
|
|
Energizer Trimflex LED Reading Light Black/Silver Energy-Efficient Spring Clip Spring Clip $18.49 Bulb Type: LED Color(s): Black/Silver Material(s): Plastic Power Source(s): 2 CR-2032 Lithium Ion Batteries. Unit of Measure : Each…. |
|
|
Coleman Cree 7090 XR-C LED Wide Beam Flashlight $26.33 Coleman lights up your life with this wide beam flashlight. Featuring a Cree 7090 XR-C LED light and easy to change batteries, this flashlight is the perfect tool to keep in hand. |
|
|
American Tactical Imports AT Warrior Tactical Operations Flashlight $84.99 This American Tactical AT Warrior Tactical Operations Flashlight features a world-class super bright Cree XR-E LED. The tactical light puts out a maximum 230 lumens. |
|
|
Vidas Valientes (Paperback) $8.9 In the new film COURAGEOUS (from the makers of Fireproof), four police officers are confident and focused when it comes to facing danger on the job. But leading their families at home in a God-honoring way? That takes courage. Because… |
|
|
Credo $21.95 One of the world’s leading theologians offers important insights into the history and significance of Christian creeds.“A work of keen insight, great learning, and ecumenical generosity.”—Robert Louis Wilken, Fir… |
|
|
Mitch Miller – A Major Musical Force With The Leading Artists Of His Day $24.42 Disc 1:Tzena, Tzena, TzenaSleigh, TheAutumn LeavesSong of DelilahPerdidoWhippa-Whippa-WooSea of the Moon, TheBim, Bam, BabyMy Heart Cries for YouRoving Kind, TheBeautiful Brown Eyes… |
|
|
Dorcy Cree LED Tactical Tail Cap Flashlight $39.99 DORCY CREE LED TACTICAL TAIL CAP FLASHLIGHT 200 LUMEN 3AAACree LED Tactical Tail Cap FlashlightFeatures:200 Lumens3AAA3 Hour Run Time229 ft. Beam DistanceLED, CREE Q5 Bulb TypeAluminum Alloy ConstructionLED Forever BulbDual Functionality Tail Cap SwitchTactical Momentary – Pause Push ButtonTap Cap T |
|
|
LR6 Reflector/Trim by Cree Lighting $17 The Cree LR6 Reflector/Trim is designed to easily snap onto the Cree LR6 6″ Recessed Light Engine. The exterior trim flange (or ring) is white and the interior reflector is available in several colors. Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting LR6 Reflector/Trim is available with the following: Details:Exterior White painted flange/trim; Interior reflector available in 6 colorsSnaps onto the integrated white trim and white reflector of the Cree LR6 6″ Recessed Light Engine UL Listed for damp locationsOptions:Color: Black, Graphite (shown), Pewter, Smooth White, Standard Anodized Aluminum, or Wheat.Shipping: This item usually ships within 3-5 days. Dimensions: Trim: Overall Diameter 7.38 In., Inner Diameter 5.5 In. |
|
|
Remington Cree LED Headlight – RAYRMHL2AAA-B $39.99 Spend time in the woods hands free. This Remington LED light has a red diffuser for night vision, white diffuser for flood lighting, an adjustable head strap and operates on 2AAA batteries included. |
|
|
LR4 Reflector/Trim by Cree Lighting $17 The Cree Lighting LR4 Reflector/Trim is made from anodized aluminum, and includes an exterior White painted trim flange (or ring) and an interior reflector that is available in 5 colors. Fits the Cree LR4 4″ Light Engine. Order the Deep Recess option to fit a Deep Recess LR 4″ Light Engine. Order the Moderate Recess option to fit a Moderate Recess LR4 4″ Light Engine. Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting LR4 Reflector/Trim is available with the following: Details: Anodized aluminum body Exterior White painted trim flange (or ring) with interior reflector available in 5 colors Moderate or deep recess options UL Listed for damp locations Options: Recess Depth: Deep, or Moderate. Interior Reflector Color: Black, Pewter, Standard Anodized Aluminum, Wheat, or White Paint.Shipping: This item usually ships within 3-5 days. Dimensions: Trim: Overall Diameter 6.5 In., Inner Diameter 4.5 In. |
|
|
LR6 6 Recessed LED Architectural Downlight by Cree Lighting $142.8 The Cree Lighting LR6 6″ Recessed LED Architectural Downlight includes new Cree technology engineered to deliver uniform, high quality white light–in an LED. This downlight has two color temperature choices: 2700K or 3500K. The 2700K is a warm light that is ideal for residences; the 3500K is a cooler white light that is an excellent choice for commercial use. Designed to last 50,000 hours (and maintain at least 70% of initial lumen output). Standard white trim/white reflector; snap on white room-facing trim flange with a reflector available in several colors. Title 24 compliant when GU24 (BiPin) socket is selected. This item ships as 3 components: a housing, a light engine, and a trim/reflector. Please note that the price of this product is for a complete fixture including all 3 components. Components are also available individually (see related items below). Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting LR6 6″ Recessed LED Architectural Downlight is available with the following: Details:Housing made from die-cast aluminumLED Light engine with retention mechanism available in 2 color temperatures, 2700K (warmer) or 3500K (cooler)CRI = 92Standard white trim with white reflector; snap on white painted flange and reflector available in 6 colorsSuitable for insulated or non-insulated ceilings Dimmable to 20% with certain incandescent dimmersUL Listed for damp locationsAirtight ratedEnergy EfficientOptions:Color Temp: 2700K, or 3500K.Socket Base: Edison Standard, or GU24 (BiPin).Trim Color: Black, Graphite, Pewter, Smooth White (shown), Standard Anodized Aluminum, or Wheat.Lighting:Edison Standard option utilizes one 12 Watt 120 Volt Edison Standard Base LED lamp (included).GU24 option utilizes one 12 Watt 120 Volt GU24 Base LED lamp (included).Shipping: This item usually ships within 3-5 days. Dimensions: Housing: Width 7.5 In., Height 12.5 In., Depth 7.5 In. Light Engine: Diameter 7.38 In., Height 6 In. Trim: Overall Diameter 7.38 In., Inner Diameter 5.5 In. |
|
|
LR6 Surface Mount Cylinder by Cree Lighting $54.4 The Cree Lighting LR6 Surface Mount Cylinder is a surface mounted housing designed to accommodate the L6 6″ recessed LED downlight (GU24 socket only) when it’s not possible to recess in the ceiling. The housing attaches directly to a standard 4″ electrical junction box. Features a spun aluminum housing and textured white polyester powder paint. Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting LR6 Surface Mount Cylinder is available with the following: Details:Spun aluminum housing with textured White polyester powder paintAttaches directly to standard 4″ electrical junction boxesNot designed for pendant or cord mountingUL Listed for damp locationsEnergy EfficientShipping: This item usually ships within 3-5 days. Dimensions: Housing: Diameter 7.63 In., Height 6.88 In. |
|
|
LR4 4 Recessed LED Architectural Downlight by Cree Lighting $173.4 The Cree Lighting LR4 4″ Recessed Architectural Downlight is designed for use in commercial and residential applications. Available with a moderate or deep recess angle, offering flexibility to meet diverse lighting design requirements. For a more focused light, choose the Deep Recess option. For a more diffused light, select the Moderate Recess option. Also, this downlight has two color temperature choices: 2700K or 3500K. The 2700K is a warm light that is ideal for residences; the 3500K is a cooler white light that is an excellent choice for commercial use. IC Rated and suitable for use in insulated and non-insulated ceilings. LED light is designed to last 50,000 hours and maintain at least 70% of initial lumen output. This item ships as three components: a housing, a light engine, and a trim/reflector. Please note that the price of this product is for a complete fixture including all three components. Components are also available individually (see related items below). Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting LR4 4″ Recessed LED Architectural Downlight is available with the following: Details: Ships as three components: a housing, a light engine, and a trim/reflectorRecessed architectural housing with integral extruded aluminum bar hangers LED Light engine with retention mechanism available in two color temperatures, 2700K (warmer) or 3500K (cooler)CRI = 94 (2700K) or 91 (3500K)Designed to last 50,000 hours and maintain at least 70% of initial lumen outputArchitectural reflector/trim with white painted flange/trim and reflector available in 6 colors Suitable for insulated or non-insulated ceilingsDimmable to 20%UL Listed for damp locations Airtight rated Energy Efficient Options: Color Temp: 2700K, or 3500K. Recess Depth: Deep, or Moderate (shown). Reflector and Trim Color: Black, Pewter, Standard Anodized Aluminum, Wheat, or White Paint.Lighting: Deep option utilizes 11.1 Watt 120 Volt LED lamps (approximate 540 delivered lumens) (included). Moderate option utilizes 10.5 Watt 120 Volt LED lamps (approximate 540 delivered lumens) (included). Shipping: This item usually ships within 3-5 days. Dimensions: Housing: Height 7 In., Width 8.75 In., Length 14 In. Trim: Inner Diameter 4.5 In., Overall Diameter 6.5 In. Moderate Recess Light Engine: Diameter 6 In., Height 5.25 In. Deep Recess Light Engine: Diameter 6 In., Height 7 In. |
|
|
Norlite Tactical CREE XR-E Flashlight $18.99 08-NSWAT 1 x LED Flashlight 160 Lumen 2 x AA 5 Hour 6″ Length x 1″ Diameter Low heat dissipation Energy efficient Tactical CREE XR-E LED Flashlight 2 x AA Batteries Tailcap On/Off switch The Tactical CREE XR-E LED Flashlight is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy, lifetime and quality of light. These lighting-class features enable the XLamp XR-E LED to replace many traditional light sources and save money with energy-efficient light and long lifetimes. Aluminum Casing Battery Flashlight Hoffco Brands, Inc LED Lifetime Norlite Tactical CREE XR-E Flashlight www.hoffcobrands.com |
|
|
LR6 6 Recessed Light Engine by Cree Lighting $110.5 The Cree Lighting LR6 6″ Recessed Light Engine is part of the Cree LR6 downlight system, which offers an innovative white light LED downlight for use in commercial and residential applications. Designed for quick installation in the LR6 6″ housings available from Cree; for 6″ light housings. Available in two light temperatures: 2700K or 3500K. The 2700K is a warm light that is ideal for residences; the 3500K is a cooler white light that is an excellent choice for commercial use. Comes standard with a white trim and white reflector; The snap on Cree LR6 Reflector/Trim is available in 6 colors. IC Rated and suitable for use in insulated and non-insulated ceilings. LED light is designed to last 50,000 hours and maintain at least 70% of initial lumen output. Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting LR6 6″ Recessed Light Engine is available with the following: Details:LED Light engine with retention mechanism, available in 2 color temperatures: 2700K (warmer) or 3500K (cooler)CRI = 92Durable die-cast aluminum bodyDimmable to 20% with certain incandescent dimmersUL Listed for damp locationsEnergy EfficientOptions:Color Temp: 2700K, or 3500K.Socket Base: Edison Standard (shown), or GU24 (BiPin).Lighting:Edison Standard option utilizes one 12 Watt 120 Volt Edison Standard Base LED lamp (included).GU24 option utilizes one 12 Watt 120 Volt GU24 Base LED lamp (included).Shipping: This item usually ships within 3-5 days. Dimensions: Light Engine: Diameter 7.38 In., Height 6 In. |
|
|
RC6 New Construction Recessed Housing by Cree Lighting $15.3 The Cree Lighting RC6 New Construction Recessed Housing is designed to accommodate the innovative LR6 6″ Light Engine. Is UL listed and airtight rated; Title 24 compliant when ordered with GU24 (BiPin) socket. Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting RC6 New Construction Recessed Housing is available with the following: Details:Made from die-cast aluminumSuitable for insulated or non-insulated ceilingsAccommodates spans from 14″ to 24.5″ without sagAccommodates ceiling thickness from .25″ to 4″Airtight ratedTitle 24 compliant when ordered with GU24 (BiPin) socketUL Listed for damp locationsEnergy EfficientOptions:Socket Base: Edison Standard, or GU24.Shipping: This item usually ships within 3-5 days. Dimensions: Housing: Height 7.5 In., Length 12.5 In., Width 7.5 In. |
|
|
OLIGHT M20S Warrior with Cree XP-G S2 LED $119.95 Tough. Versatile. Multi-functional. Easy to operate. Like the soldiers that it is designed for the Olight M20 Warrior isfinely honed, tough and versatile. The M20′s rugged structure, stainlesssteel striking bezel, blindingly bright strobe light and multiplefunctions give it a strength and versatility never seen before in thehand-held lighting market. The M20 Warrior is all the lighting tool youneed in the battlefield or on the job. Bright, rugged, and flexible theM20′s multiple output levels and modes lend it a versatility anddurability that make it the ideal tool for any task. The M20 Warrior is agreat choice for personal protection; the blinding light andcrenellated striking bezel on both ends give added effectiveness whenused for self-defense. With 3 levels of output and up to 340 lumens, plus a tactical strobe,the M20 Warrior is sure to please many types of users from theoutdoorsman to the soldier.Features World-class super bright Cree XP-G S2 LED Three output levels and strobe, simple interface to adjust output,loosen head then retighten to select modesAutomatic memory function, remember last used setting and can be preset to specific output mode for instant accessMultiple battery choices, uses both Li-ion Rechargeable& Non Rechargeable Lithium Batteries to provides the ultimate powerto weight ratio and reliabilityUltra Efficient Advanced Digital Power Management System for a smooth and even brightness over the duration of battery lifeReverse polarity protection circuit to protect electronics against damage caused by battery being installed incorrectlySuperior heat sink quick dispersion of heat to protect LED and electrical components and ensure long life Side switch to select output when power on or direct access to strobe when power off Superior heat sink quick dispersion of heat to protect LED and electrical components and ensure long lifeErgonomic design, solid aluminium constructionTough durable Type III Hard Anodization Built to meet Mil-specMIL-STD-810FO-Ring sealed to provide excellent water resistance and long service lifeGrip ring with anti-rolling design, enabling use withthe different tactical holds,removable to convert to smoother straight bodyStainless steel strike bezel (Removable) Stainless steel pocket clip (Removable)Ultra Clear Glass lens, non scratch with Anti-Reflective CoatingHeavy duty quick release lanyard to prevent loss and easy accessInterchangeable reflectorsFull Textured (orange peel) Reflector provides aperfectly centerd flawless beam reaching distances not seen in other LEDlights Optional Smooth Reflector used to gain even greater distance for further targets,ideal when used as weapon light Battery magazine use with CR123A batteries, holdbatteries firmly to provide excellent continuity and battery life underheavy shock or recoilSpecifications:LED Cree XP-G S2 LED, life span up to 50000 hours, Max Output 340Lm Weight 120.5g (without batteries)Dimensions Overall length 140mm, Body Dia25mm, Bezel Dia33.5mmFu |
|
|
LR4 4 Recessed Light Engine by Cree Lighting $119 The Cree Lighting LR4 4″ Recessed Light Engine features proprietary “TrueWhite” LED technology, which is able to maintain color consistency over time and with temperature fluctuations. This Light Engine has two recess options: deep and moderate. For a more focused light, choose the Deep Recess option. For a more diffused light, select the Moderate Recess option. Also, this light engine has two color temperature choices: 2700K or 3500K. The 2700K is a warm light that is ideal for residences; the 3500K is a cooler white light that is an excellent choice for commercial use. IC Rated and suitable for use in insulated and non-insulated ceilings. LED light is designed to last 50,000 hours and maintain at least 70% of initial lumen output. When selecting the Cree LR4 Reflector/Trim to accompany the LR4 Light Engine, order the Deep Recess LR4 Reflector/Trim option to fit the Deep Recess LR 4″ Light Engine. Order the Moderate Recess LR4 Reflector/Trim option to fit a Moderate Recess LR4 4″ Light Engine. Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting LR4 4″ Recessed Light Engine is available with the following: Details: LED Light engine with retention mechanism, available in two color temperatures: 2700K (warmer) or 3500K (cooler)CRI = 94 (2700K) or 91 (3500K)Designed to last 50,000 hours and maintain at least 70% of initial lumen outputDimmable to 20%UL Listed for damp locationsEnergy EfficientOptions: Color Temp: 2700K (shown), or 3500K. Recess Depth: Deep (shown), or Moderate.Lighting: Deep option utilizes 11.1 Watt 120 Volt LED lamps (approximate 540 delivered lumens) (included). Moderate option utilizes 10.5 Watt 120 Volt LED lamps (approximate 540 delivered lumens) (included). Shipping: This item usually ships within 3-5 days. Dimensions: Deep Recess Light Engine: Height 7 In., Diameter 6 In. Moderate Recess Light Engine: Diameter 6 In., Height 5.25 In. |
|
|
Fenix LD20 6-Level High Performance Cree LED Flashlight, Black (180 Lumens) $59.95 The Fenix LD20 is a digitally controlled constant-current multilevel flashlight. It has six levels of output, which not only allows the user to select the best compromise between brightness and runtime for any given task but also has ability to aid in an emergency. The LD20 does all this and still retains a compact size. If you’re looking for solid reliability, digitally regulated brightness, and compact size, this Fenix is for you. Features Utilizes a Premium (R5) Cree 7090 XP-G LED with a … |
|
|
Recessed Housing for LR4 4 Light Engine by Cree Lighting $37.4 The Cree Lighting Recessed Housing for LR4 4″ Light Engine: this housing is designed for use with Cree’s LR4 4″ Light Engine. The housing’s hangers accommodate spans from 10.25″ to 24.75″, and adjustable bar hanger brakes prevent the hangers from sliding during installation. IC Rated and suitable for insulated or non-insulated ceilings. With a GU24 (BiPin) socket. Made from cold rolled steel with extruded aluminum hangers. Cree is leading the LED lighting revolution through the use of energy-efficient, environmentally friendly LED lighting. Cree is a market-leading innovator of lighting-class LEDs, LED lighting, and semiconductor solutions for wireless and power applications. The Cree Lighting Recessed Housing for LR4 4″ Light Engine is available with the following: Details:Made from cold rolled steel and extruded aluminum Suitable for insulated or non-insulated ceilingsAccommodates spans from 10.25″ to 24.75″ without sagAdjustable bar hanger brakesGU24 (BiPin) SocketAirtight ratedIC RatedTitle 24 CompliantUL Listed for damp locationsShipping: This item usually ships within 3-5 days. Dimensions: Housing: Height 7 In., Length 14 In., Width 8.75 In. |
|
|
R90 Tenergy Premium LED Flashlight with Cree 7090 XR-E – 190 Lumens! $79.9 Tough. Versatile. Multi-functional. Easy to operate.A mini charming everyday carrying light, extremely compact and portable, can make a high power. Unique design for half smooth reflectorand half orange peel reflector offer a smooth and long beam shot. Interchangeable for head with T70 and T80R.Output/Runtime:Digital infinite beam adjustment6lm(50h)-190lm(1h)Strobe(High)2hSOS (High)3hFeatures:LED type:Cree 7090-XR-E Q5, life span up to 50000 hoursReversed polarity protection Made of aerospace grade aluminium alloyErgonomic design for various functions:anti-rolling,anti-*shattering,water resistant,shockproofHard finish with Type anodizationAluminium alloy reflector with half smooth and half orange peelOutput level6lumens to 190lumensDigital infinite beam adjustment function, choose and memorize the favorite brightness levelConstant current output control system Reverse switch, illumination – Strobe – S.O.S function Specifications:LED TypeCree 7090 XR-E Q5, 3WBatteryCompatible for 1 x CR123A / 1 x RCR123A Size90mm(L)* 27mm(D)Weight 65 g without batteriesAccessoriesOne lanyard, two spare O-rings, one spare tail cap rubber boot Batteries Sold Separately. |
|
|
T70 Tenergy Premium LED Flashlight with Cree 7090 XR-E – 120 Lumens! (Uses AA Alkaline or Rechargeables) $52.99 Tough. Versatile. Multi-functional. Easy to operate. The cigar grip gives a comfortable handling for mini size T70. Simple operation anddigital infinite beam adjustment function make it practical. Interchangeable for the head with T80 and T90. It is easy to carryit at freedom everyday.Output/Runtime:Digital infinite beam adjustment, 6lm(30h)-120lm(0.8h)FeaturesBeautiful bullet modelLED type:Cree 7090-XR-E Q5,life span up to 50000 hours Battery reverse-polarity protection Made of aerospace grade aluminium alloy Ergonomic design for various functions:anti-rolling,anti-shattering,water resistant,shockproof Hard finish with Type anodization Aluminium alloy reflector with half smooth and half orange peel Output level6lumens—120lumens Digital infinite beam adjustment function,choose and memorize the favorite brightness levelConstant current output control system Remark:when the voltage lower than 0.8V,the circuit may run abnormally,please replace the battery in time. Specifications:LED TypeCree 7090 XR-E Q5, 3WBattery1 AA Alkaline / 1 AA NiMH / 1 Rechargeable 14500 Li-Ion BatterySize105.5mm(L)* 27mm(D)Weight 80 g without batteriesAccessoriesOne lanyard, two spare O-rings, one spare tail cap rubber boot |
|
|
2011 OLIGHT M20S Warrior – Cree XP-G S2 LED – w/ Tenergy Propel 20 CR123A Batteries $150 Tough. Versatile. Multi-functional. Easy to operate.Like the soldiers that it is designed for the Olight M20 Warrior is finely honed, tough and versatile. The M20′s rugged structure, stainless steel striking bezel, blindingly bright strobe light and multiple functions give it a strength and versatility never seen before in the hand-held lighting market. The M20 Warrior is all the lighting tool you need in the battlefield or on the job. Bright, rugged, and flexible the M20′s multiple output levels and modes lend it a versatility and durability that make it the ideal tool for any task. The M20 Warrior is a great choice for personal protection; the blinding light and crenellated striking bezel on both ends give added effectiveness when used for self-defense.With 3 levels of output and up to 340 lumens, plus a tactical strobe, the M20s Warrior is sure to please many types of users from the outdoorsman to the soldier.Features:World-class super bright Cree XP-G S2 LED. Three output levels and strobe, simple interface to adjust output,loosen head then retighten to select modes. Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. Multiple battery choices, uses both Li-ion Rechargeable & Non Rechargeable Lithium Batteries to provides the ultimate power to weight ratio and reliability. Ultra Efficient Advanced Digital Power Management System for a smooth and even brightness over the duration of battery life. Reverse polarity protection circuit to protect electronics against damage caused by battery being installed incorrectly. Superior heat sink quick dispersion of heat to protect LED and electrical components and ensure long life. Side switch to select output when power on or direct access to strobe when power off. Ergonomic design, solid aluminium construction. Tough durable Type III Hard Anodization Built to meet Mil-specMIL-STD-810F. UL # MH48285 O-Ring sealed to provide excellent water resistance and long service life. Grip ring with anti-rolling design, enabling use with the different tactical holds,removable to convert to smoother straight body. Stainless steel strike bezel (Removable). Stainless steel pocket clip (Removable). Ultra Clear Glass lens, non scratch with Anti-Reflective Coating. Heavy duty quick release lanyard to prevent loss and easy access. Interchangeable reflectors. Full Textured (orange peel) Reflector provides a perfectly centerd flawless beam reaching distances not seen in other LED lights. Optional Smooth Reflector used to gain even greater distance for further targets,ideal when used as weapon light. Battery magazine use with CR123A batteries, hold batteries firmly to provide excellent continuity and battery life under heavy shock or recoil.Specifications:LED Cree XP-G S2 LED, life span up to 50000 hours, Max Output 340Lm Weight120.5g without batteries DimensionsOverall length 140mm, Body Dia25mm, Bezel Dia33.5mm. BatteryUses 2x CR123A |
|
|
Olight M30 Triton LED Flashlight with Cree MC-E (Use 3x CR123A) $199.95 Olight M30 Triton MC-E LED 700 Lumens! In addition to offering Olights world-class quality construction and engineering the M30 introduces Olight’s all-new ‘Special Operations’ user interface which allows for ONE HANDED OPERATION of the light with direct access to illumination mode AND tactical strobing. The M30 Triton outputs an amazing 700 lumens on high output,a double striking bezel design and special anti-rolling design. Designed with the direct input of law enforcement and soldiers the M30 is also an ideal choice for adventure, hunting, and other tough and hazardous tasks that require the brightest and most compact package available. SpecificationLED CREE MC-E,Maximum output700LmColours availableBlack Weight 165.2g/5.83oz (excluding batteries)Dimension 43.5mm/1.71″(D) x 176.9mm / 6.96″(L), 43.5mm / 1.71″(D) x 210.9mm / 8.3″(L) with extended tube.Battery Uses Lithium 3x CR123A 3.0v (4x CR123A with ext tube), Rechargeable Li-ion 2x 18650 3.7v or Li-ion 2x 18500 3.7v w/ ext tubeFunction Three brightness levels and strobe mode.Output and runtimeHigh Mode 700 Lumens/1.5hours, Medium Mode 120 Lumens/7.5hours, Low Mode 8 Lumens/90hours, Strobe 700 Lumens/1.5hours. Accessories includedBeam Diffuser, Battery Magazine, Cell Extender, Twist Strip.Accessories optionalFilter (Blue, Red or Green), Weapon mount (suit Picatinny/Weaver rail base), Remote Pressure switch (Short or Long versions).FeaturesWorld-class super bright Cree MC-E LED, life span up to 50000 hours Ultra Bright output, 700 Lumens maxLong runtime, Max 90 hours on low. Three digitally controlled constant brightness levels and strobe.Dual function rear tailcap switches, main on/off switch with side button to select output modes or side button for direct access to strobe from power is off.Automatic memory function, remembers last used setting and can be preset to specific output mode for instant access.Ultra Efficient Advanced Digital Power Management System for a smooth and even brightness over the duration of battery life.Multiple battery choices, uses both Li-ion Rechargeable & Non Rechargeable Lithium Batteries to provides the ultimate power to weight ratio and reliability.Battery magazine use with CR123A batteries, hold batteries firmly to provide excellent continuity and battery life under heavy shock or recoil.Strike bezel (S/Steel, removable) and Tailcap with strike shroud, also possible to stand light on tailcap. Superior heat sink for quick dispersion of heat to protect LED and electronic components and ensure long life.Solid aluminium construction built to meet Mil-specMIL-STD-810F.Ergonomic design with machined anti-slip knurling provides firm grip.Tough durable Type III Hard Anodized Finish.O-Ring sealed to provide high water resistance and long service life.Textured (orange peel) reflector provides a flawless beam with a super bright field of view and distance.Ultra clear glass lens, non scratch with Anti-Reflective Coating. Pocket Clip S/Steel (removable).Twist stri |
|
|
Combo: OLIGHT M20S (Cree XP-G S2 LED) +TN270 Charger + 2 Pcs Tenergy 18650 3.7V 2600mAh (ButtonTop w/ PCB) $119.95 NEW OLIGHT M20S Warrior with Cree XP-G S2 LED (340 Lumens) Tough . Versatile . Multi-functional . Easy to operate Like the soldiers that it is designed for the Olight M20 Warrior isfinely honed, tough and versatile. The M20′s rugged structure, stainlesssteel striking bezel, blindingly bright strobe light and multiplefunctions give it a strength and versatility never seen before in thehand-held lighting market. The M20 Warrior is all the lighting tool youneed in the battlefield or on the job. Bright, rugged, and flexible theM20′s multiple output levels and modes lend it a versatility anddurability that make it the ideal tool for any task. The M20 Warrior is agreat choice for personal protection; the blinding light andcrenellated striking bezel on both ends give added effectiveness whenused for self-defense. With 3 levels of output and up to 340 lumens, plus a tactical strobe,the M20 Warrior is sure to please many types of users from theoutdoorsman to the soldier. Features:World-class super bright Cree XP-G S2 LED Three output levels and strobe, simple interface to adjust output,loosen head then retighten to select modes Automatic memory function, remember last used setting and can be preset to specific output mode for instant access Multiple battery choices, uses both Li-ion Rechargeable& Non Rechargeable Lithium Batteries to provides the ultimate powerto weight ratio and reliability Ultra Efficient Advanced Digital Power Management System for a smooth and even brightness over the duration of battery life Reverse polarity protection circuit to protect electronics against damage caused by battery being installed incorrectly Superior heat sink quick dispersion of heat to protect LED and electrical components and ensure long life Side switch to select output when power on or direct access to strobe when power off Superior heat sink quick dispersion of heat to protect LED and electrical components and ensure long life Ergonomic design, solid aluminium construction Tough durable Type III Hard Anodization Built to meet Mil-specMIL-STD-810F O-Ring sealed to provide excellent water resistance and long service life Grip ring with anti-rolling design, enabling use withthe different tactical holds,removable to convert to smoother straightbody Stainless steel strike bezel (Removable) Stainless steel pocket clip (Removable) Ultra Clear Glass lens, non scratch with Anti-Reflective Coating Heavy duty quick release lanyard to prevent loss and easy access Interchangeable reflectors Full Textured (orange peel) Reflector provides aperfectly centerd flawless beam reaching distances not seen in other LEDlights Optional Smooth Reflector used to gain even greater distance for further targets,ideal when used as weapon light Battery magazine use with CR123A batteries, holdbatteries firmly to provide excellent continuity and battery life underheavy shock or recoil SpecificationsLED Cree XP-G S2, life span up to 50000 hours, Max Output 340Lm Weight |
|
|
OLIGHT T20 Cree XP-G S5 (Use 2x CR123A Batteries) $74.95 The Olight T20 features three brightness levels and strobe. Easily operated, the various levels/modes are adjusted by twisting the head slightly. The Olight illumination level/mode memory saves the last level or mode used before the light was turned off, returning to that level/mode when the light is turned back on.The Military version also features a redesigned switch with a momentary feature at half-press and a redesigned body optimized for the cigar / syringe / Rogers hold alongside a handgun. The Military also offers a lockout feature to prevent accidental activation.Digital regulation using the constant current technique means that output at every brightness level will be constant not fluctuating with battery life. Additionally the constant current technique means greater efficiency for longer runtimes and the most effiencient usage of the battery.The Olight T20 TACTICAL utilizes a unique linear pattern for brightness adjustment; which is different from traditional PWM used by many competitors, to do away with the strobing effect some users can perceive.SpecificationsUses 2 X CR123A batteries – primary or rechargeable. (not included).Ultra Efficient, State of the art CREE 7090 XR-G S2 WC LED 220+ lumens on high!forward tactical click switch.Unique texture reflector ensures a smooth beam and excellent throw.Specially designed for waterp resistance and anti-roll.AR coated glass lense.Aluminium alloy case with MIL-SPEC Type III black hard anodized finish.128.5mmx21.6mmm, 68.5g.FeaturesUltra high performance Cree XP-G S2 LED provides Shock-Proof dependable lighting.Full textured reflector for flawless far reaching beamHigh Output, 285 lumens max Ultra efficient advanced digital power management system for smooth and even brightness over the duration of battery life.Three digital constant brightness levels plus strobeUser friendly interface, loosen then tighten head to select desired output level.Automatic memory function, remember last used setting & will come on at same level as when turn off.Tactical click-on/off switch with momentary on function. Solid Aluminium Construction, Ergonomic design with anti-slip knurled finish for firm grip and easy operation.Tough durable Type III Hard Anodising.Built to meet Mil-spec MIL-STD-810F.Ultra Clear Glass lens, non scratch with Anti-Reflective Coating. O-ring seals provide high water resistant and long service life .Stainless steel pocket Clip Accessories included Holster, Lanyard, Spare O-rings and Spare rubber switch boot. |
|
|
2010 Olight M30 Triton LED Flashlight with Cree MC-E R2 with 10 Tenergy Propel CR123A Lithium Battery (PTC Protected) $199.95 Olight M30 Triton MC-E LED 700 Lumens In addition to offering Olights world-class quality construction andengineering the M30 introduces Olight’s all-new ‘Special Operations’user interface which allows for ONE HANDED OPERATION of the light with direct access to illumination mode AND tactical strobing. The M30 Triton outputs an amazing 700 lumens on high output,a doublestriking bezel design and special anti-rolling design. Designed withthe direct input of law enforcement and soldiers the M30 is also anideal choice for adventure, hunting, and other tough and hazardoustasks that require the brightest and most compact package available. SpecificationLED CREE MC-E, Maximum output700Lm Colours availableBlack / Gunmetal Grey Weight 165.2g/5.83oz (excluding batteries) Dimension 43.5mm/1.71″(D) x 176.9mm / 6.96″(L), 43.5mm / 1.71″(D) x 210.9mm / 8.3″(L) with extended tube. Battery Uses Lithium 3x CR123A 3.0v (4x CR123A with exttube), Rechargeable Li-ion 2x 18650 3.7v or Li-ion 2x 18500 3.7v w/ext tube Function Three brightness levels and strobe mode. Output and runtimeHigh Mode 700 Lumens/1.5hours, Medium Mode120 Lumens/7.5hours, Low Mode 8 Lumens/90hours, Strobe 700Lumens/1.5hours. Accessories includedBeam Diffuser, Battery Magazine, Cell Extender, Twist Strip. Accessories optionalFilter (Blue, Red or Green), Weapon mount(suit Picatinny/Weaver rail base), Remote Pressure switch (Short orLong versions).FeaturesWorld-class super bright Cree MC-E LED, life span up to 50000 hours Ultra Bright output, 700 Lumens max Long runtime, Max 90 hours on low. Three digitally controlled constant brightness levels and strobe. Dual function rear tailcap switches, main on/offswitch with side button to select output modes or side button for directaccess to strobe from power is off. Automatic memory function, remembers last used setting and can be preset to specific output mode for instant access. Ultra Efficient Advanced Digital Power Management System for a smooth and even brightness over the duration of battery life. Multiple battery choices, uses both Li-ionRechargeable & Non Rechargeable Lithium Batteries to provides theultimate power to weight ratio and reliability. Battery magazine use with CR123A batteries, holdbatteries firmly to provide excellent continuity and battery life underheavy shock or recoil. Strike bezel (S/Steel, removable) and Tailcap with strike shroud, also possible to stand light on tailcap. Superior heat sink for quick dispersion of heat to protect LED and electronic components and ensure long life. Solid aluminium construction built to meet Mil-specMIL-STD-810F. Ergonomic design with machined anti-slip knurling provides firm grip. Tough durable Type III Hard Anodized Finish. O-Ring sealed to provide high water resistance and long service life. Textured (orange peel) reflector provides a flawless beam with a super bright field of view and distance. Ultra clear glass lens, non scratch with Anti-Reflective Coating. Pocket Clip S/Steel (remov |
|
|
Chauvet Led Pinspot 2 $39.99 The Chauvet LED Pinspot 2 includes two front focal lens options to produce hard-edged beams for a variety of applications. At less than one pound, the LED Pinspot 2 is extremely lightweight and is powered by a 3-watt, white LED. The autoswitching power supply allows the LED pinspot 2 to adapt to the voltage provided, ranging from 100V to 240V. The Chauvet LED pinspot includes multiple lenses to change beam angles.Compact, hard-edged LED pinspotHigh-power, 3W (700mA) LEDLight source: 1 (white) LED rated @ 50,000 hours (6500K) (Cree)Includes multiple lenses to change beam anglesBeam angle: 6 degrees (installed) 9 degrees (included)Lux (6 degrees): 15,000 @ 1mLux (9 degrees): 5,550 @ 1mWeight: 0.9 lb.Dimensions: 5.9″ H x 4.2″ W x 7.6″ D |
|
|
Leapers UTG Integrated Tactical LEd Pistol Flashlight $52.95 Features: * UTG Integral Tactical LED Pistol Flashlight * Best in Class with CREE Q5 LED * Integrated Reflector and Light Bulb to Provide Instant Spot Focus for Clear Object Identification * Ambidextrous Finger Adjustable Toggle Permanent On Off Switch * Complete with Integral Picatinny Weaver Mounting Deck and 2 Lithium Batteries |