http://www.cleverscampcamp.com/striker-survival/
What should I put in my Survival Kit?
I’m made a survival kit out of 2 Altoid tins. So far i’ve fit a:
Swiss Army Knife
LED Flash Light (Size of my thumb)
Cotton ball (Soaked in alcohol and secured in a bottle cap)
35 Matches (Striker taped to the inner top of the tin)
and
10 bandaids
What else should I add? All of the things I listed fit in one altoid tin. I have one more to fill up. Remember it has to fit in the tin.
Oh yeah this is for if im lost in the woods or the desert.
check out this one I found for you
1 Survival Cheat Sheet – the Universal Edibility Test, Body Signals and Ground-to-Air Signals
Shelter
1 large trash bag
1″ piece of drinking straw, sealed and filled with 5.25% sodium hypochlorite bleach.
1 rubber glove
1 BSA Hot Spark
10 matches with striker & cover
2 cotton balls
1 birthday candle
2 bandaids
1 small bolt w/ nut
1 safety pin
1 small SAK
2 jig saw blades
4 fish hooks
2 fishing flies – one wet, one dry
5 split-shot sinkers
15′ 15 lb. test line
1 rubber band
Remember the 3/32″ hole? The tin is modified to be a handle for the saw. The kit contains coarse and fine saw blades.
A slit is milled in the top lid of the tin and has a corresponding bottom of the tin has a channel cut from the wall of the side to allow the tin to close and to add support for the blade. A 3/32″ hole drilled in the tin near the same location. A jigsaw blade, similar to that used in the Gerber multitool fits through the slit and the hole in the blade is lined up with the hole in the tin. A screw and nut turn the kit into a handle for the saw blade to make a mini-saw.
The 3/32 hole is also used as a sighting system for signaling. The inside of the tin is shiny. Use the hole to point toward the plane to flash signals to them.
Notes
Water purification – water is stored in the glove. To disinfect, use the bleach. The 1″ tube provides about 8 drops of bleach. Puncture it and add 2 drops per quart to sanitize water as per FEMA instruction. Curious note: the Altoids tin filled 8 2/3 times (to the bottom of the hinges) makes about a quart of water.
Distance & Height Measurement – The cord can have a loop in one end and a knot at 36″ from the loop. This 3 foot measurement works with the 3/32″ hole to form a basic (READ: Good ‘nuf) distance/height measurement system. at 100 yards, an image fitting in the hole is 9 foot 4 1/2″ tall. 2/3 of the height of the hole – 1/16″, is about 6 feet.
http://www.survival.com/best.htm
Fig’s 5/5 STRIKER’s Survival Hunter 5th PvP video